Top 13 Best Plasma Cutter 2019 ReviewsWhat do you want to buy or what is suitable for you, these two are relatable points but quite different as well. So, before buying anything, you must check reviews about its quality and warranty.

If you are looking for Best Plazma Cutters and you are confused which one to buy? Don’t worry we have collected Top 13 Best Plazma Cutter in this article and with all the respect you can read the reviews in detail as well.

Plazma Cutters are Essential in Welding Industry so this is a Good idea to get a perfect product with amazing features.

Tools makes our life easier and if we want to grow and make things better then we have to use best Tools to get best results.

Pleazma Cutters are really important when it comes to Welding so i this article you will have a detailed guide about it and all of your fears will be cleared.

Here we are going to check best plasma cutter 2019:

NameInput Voltage Cut Thickness 
Lotos Non-Touch Pilot Arc Plasma Cutter
(Editor’s Choice)
110 V/220 V AC/DC1-1/2"(12mm)
SUPER DEAL DC Inverter Plasma Cutter 110V/60Hz AC1-12mm
PRIMEWELD Premium & Rugged 50A Air Inverter Plasma Cutter110/220V AC 1/2" Clean Cut
ZENY DC Inverter Plasma Cutter110V or 220V1-12mm
Goplus CUT-50 Electric Digital Plasma Cutter Inverter110V or 220V1-12mm
SUNCOO Cut-50 Plasma Electric Cutter110V or 220V1/2"
ViVoHome
Hobart Airforce 12ci Plasma Cutter120V12ci
HITBOX Air Plasma Cutting Machine 220V1-12mm
Biltek 50Amp Air Plasma Cutter110V/220V1/2"
Amico CUT-50, 50 Amp Pro. Plasma Cutter110V & 230V AC1.0"
Mophorn 50Amp Plasma Cutter110V or 220V12mm

1. Best Lotos Plasma Cutter Reviews – Cheap Affordable

Lotos LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V/220V, 1/2 Inch Clean Cut, BrownThese lotos machines are commonly known as Chines products and are very famous due to its work quality and less price. Here we will just discuss best low-cost plasma cutter Lotos LTP5000D, with great quality of cutting as highly expensive machine’s work.

Qualities which are making it best among all:

LotosLTP5000D is a machine which is useful for nonprofessional setups. Like you can use this machine for daily life hacks. Whenever you decide to buy the best plasma cutter for home use, you must consider the consumables that your machine will use. It can cut rough, painted and corroded surfaces and is able to cut thin metal. It has dual voltage competency so the machine can run on 220V50/60 Hz.

If you are thinking about its warranty then I would like to tell you that it has one year warranty.

If your machine deceives you under of that one year mark then you can claim this product. Lotos has been around for a good while now and has sold a ton of machines.

It is suitable for alloy steel, mild steel, copper aluminum, and stainless steel as well. It has the ability to cut 1/2” thickness of the item. Moreover, it has world best cooling system, PAPST Advanced German cooling system.

Let us take a look at some pros and cons of Lotos LTP5000D:

 

Pros
  • On the low price, it is one of the best plasma cutters that will help you at its best.
  • If you have decided to buy it then you should relax because you are going to be happy with it and get ready for getting a proficient machine.
  • It will prove as a complete package, you will find all the qualities that you need.
Cons
  • As you know that there is nothing perfect so like everything this machine has also some flaws, let us discuss:
  • The quality of the material which has used while designing this product is not good enough.
  • The spare parts will be not available in future.
  • The torch works great but it is not able to work on a long period for rough things.

 

2. SUPER DEAL DC Inverter Plasma Cutter Welding Machine

SUPER DEAL DC Inverter Plasma Cutter Welding Machine With Screen Display Dual Voltage 110/220V AC 1/2" Clean Cut (CUT 50)SUPER DEAL DC Inverter Plasma Cutter Welding Machine is a best plasma cutter. It provides you with all the services according to your expectations.

It is a recent product in the plasma cutter chain.  It is good for applying extra skepticism to goods. In short, we can say it is an economical alternative of traditional methods for dividing and cutting metal.

Here are some qualities of this efficient best portable plasma cutter:

  • You can use it as a professional user without any hassle.
  • This machine is impartially skillful with effective cost solution.
  • It has a standard 110/60Hz voltage.
  • Its inverter is capable of using 220-volt plug.
  • It can handle 20-50A current.
  • It has a powerful torch, can cut the product from anywhere between 1-12mm in a few seconds.
  • It can cut surfaces smoothly and you will not have to polish the cut area.
  • Given ten minutes but you should use it for 6 minutes approx.
  • It has fairly solid 18.5 x 11 x 13.5-inch design.
  • This machine is constructed with heavy iron in orange-yellow color with electronic guts IP21 protection.
  • The front has a digital display and visible air pressure gauge.
  • The display helps you to see where the machine is working thus can help you to control it.

In the deal you can get a lot of things with this best plasma cutter 2019 or you can say that the best plasma cutter for metal art is having gifts for you in the deal.

  • Best air regulator
  • Powerful LG-40 cutting torch
  • An Earth clamp
  • A Chipping hammer
  • Best Wire brush
  • A PG Head
  • A welding face mask

One considerable thing is that, it may take a moment to understand your instruction, in case if you are a first time user.

Pros
  • It has high cutting speed with continuous current regulation.
  • With affordable prices it has long service life.
  • It is good in heat dissipation and very easy to operate.
  • You can watch what you are working after putting your work on its screen display.
  • It is a perfect product for the metal materials and having the power of low energy consumption.
  • This is useful for business, professional operators and DIY users.
Cons
  • There is no plug-end for a 220/110 connection.
  • You need to purchase a plug-end.
  • You will have to spend some more dollars for buying an air supply line.

 

3. PRIMEWELD Premium & Rugged 50A Air Inverter Plasma Cutter Automatic 

PRIMEWELD Premium & Rugged 50A Air Inverter Plasma Cutter Automatic Dual Voltage 110/220VAC 1/2" Clean Cut PortableHere we are going to discuss a premium and rugged plasma cutter having high specifications. You need to pay attention if you interested in purchasing a best plasma cutter 2019.

It is very reliable and it will do its job according to your requirements.  Before buying any plasma cutter just know its characteristics. Let us know more about one of the best plasma cutters. Here are its specification:

Definitive Plasma Cutter:

It can cut up to 1/2” with the maximum thickness 3/4”. You can use this 50 Amp Digital Air Inverter Plasma Cutter on industrial level, at home, construction work and you can use it as a hobby as well.

Make accurate cut, as you want:

It has automatic dual voltage 110v and 220v. You can cut alloy steel, copper aluminum, mild steel, stainless steel and many other metal materials in smooth shape.

This is truly portable:

If you want any portable best plasma cutter for metal art, which you can easily move from place to place and project to project, this is the perfect item for you. This is an amazing and best plasma cutter for the price and never break the bank. You will never regret after getting this high quality product.

Professional designed best cutter:

This product is designed by professionals, high quality product which is perfect for metalwork and can make any shape, any size. Due to its design, it is an optimized product based on the art MOSFET transistors.

Warranty and Reliability:

Whenever you are thinking for the plasma cutter then first go for best plasma cutter reviews, this will help you out from any confusion. PRIMEWELD premium & rugged plasma cutter has many reviews about its warranty and reliability. This is highly reliable and holds 3 year warranty.

Used for professional and home:

PRIMEWELD plasma cutter is using in rugged industries and construction areas because this plasma cutter has the quality of less fire hazard and cleaner cut. You can buy it for home as well as for professional use because it is perfect for any project.

Pros
  • It is high frequency plasma cutter which can cut faster with low distortion.
  • This is an automatic 110/220 volt dual voltage product. You can use it with very friendly carrying handle which can cut quickly and easily.
  • You can move its torch trigger for a custom outfit and it can be used in finger and thumb positions.
Cons
  • It is only having a 220V plug
  • It is coming with insufficient instructions
  • It is a scratch start machine so it uses the consumables more quickly

 

4. ZENY DC Inverter Best Plasma Cutter 2019 Review

ZENY DC Inverter Plasma Cutter 50AMP CUT-50 Dual Voltage 110/220V Cutting Machine (CUT-50)When you have been finding the right cutter then many questions and expectations are raised in your mind according to your required plasma cutter like what will be the warranty?

What is the perfect voltage? What kind of material it can cut? And many more.

If you are thinking about all of this and want the best specifications in one package then why you are worrying about it? Here is the best plasma cutter which can fulfil all your needs in cutting, yes we are talking about one and only ZENY DC inverter plasma cutter dual voltage cutting machine.

ZENY DC inverter plasma cutter is another product in the series of best plasma cutters. This is the best product for the treating of metal materials machinery.

Here a few specifications of this best plasma cutter;

  • It is yellow in color.
  • Its weight is 10kg.
  • It has 85% efficiency with 60% duty cycle.
  • The current range of ZENDI DC inverter plasma cutter is 20-50A with rated input current 24A.
  • It has IP21 protection class with 0.4 air pressure.
  • It has 5.5KVA power supply capacity.
  • It has Arc striking touch model with 49*40*28* (cm) packing dimensions.
  • Its power factor is 0.93 with power supply voltage 110/60Hz.
  • Its maximum cutting thickness is 1-12mm.

With Deal:

You will get many other related items along with the deal of ZENY DC inverter plasma cutter, you can say it is a complete package in low price. Here is the list of items:

  • Chipping Hammer
  • 2pcs x hoop
  • 1pc x English Manual
  • Wire Brush
  • 1pc x AIR Regulator
  • 2pcs x Plasma Tip
  • 1pcs x PG Head
  • Welding Face Mask
  • 1pc x Goggles
  • 1pc x cutting torch LG-40
  • 1pc x earth clamp
  • 1pc x Pressure decreasing valve
  • 2pcs x gas pipe clasper

Let us discuss its common pros and cons, these points will make your decision easy that what kind of plasma cutter will be better for your requirements. Here are some pros and cons of ZENY DC inverter plasma cutter.

Pros
  • Its cut is fast and clean.
  • Its finish is very decent.
  • The ground is decent, but will likely upgrade later on.
Cons
  • Its torch button is too small always missed when you are wearing gloves.
  • Ground wire and power cable are also short.
  • In almost all products the air regulator leak from somewhere.

 

5. Goplus CUT-50 Electric Digital Plasma Cutter Inverter

Goplus CUT-50 Electric Digital Plasma Cutter Inverter 50AMP 110/220V Dual Voltage Welder Cutting with Free Mask (Yellow)As you know, it is not necessary that just an expensive thing works perfectly. Same it is applied in the case of any best plasma cutter, if you are thinking that just an expensive plasma cutter will work efficiently then you are thinking in wrong direction.

In the series of plasma cuter you can find some very affordable products which can be useful on a shoestring budget. One of them is the Goplus CUT50 Plasma Cutter.

Goplus CUT50 Plasma Cutter

Goplus CUT50 plasma cutter is an electric digital plasma cutter inventor which is light in weight and performance wise very reliable. If you want a unit for home based projects then this product is very helpful for you. As every product it also has many qualities, let us discuss a few of them.

Goplus CUT50 Plasma Cutter’s Qualities:

You can buy this plasma cutter in a low price and it is used for DIY and entry level users. In this compact unit you will find a lot of power and construction inventor technology is used in it. You can say it is small unit with powerful functionality up to 30% more efficiency.

It is a light weight machine which is equipped with handles and very impressive in design. Because of its low weight you can carry it from project to project no matter how far away it is. It has an ability to work on extremely tough conditions and never gets effected by humidity as high as 80%.

Most of the best plasma cutters work either 110V or 220V but this Goplus cutter can work with both 110V and 220V. You can use it in a temperature range of -10 and +40 degrees. It can cut mild steel, stainless steel, aluminum, copper and alloy steel and various type of conductive metals.

Pros
  • It supports dual voltage; 110V and 220V.
  • It is built with inverter technology and small in size with powerful performance.
  • It has ability to cut conductive metals.
  • Its body is weatherproof and it is ideal for rugged use.
Cons
  • You cannot find any instruction for installing the power plug.
  • This machine does not have any pilot arc.
  • If you want high mobility then 6-foot cord is not enough.

 

6. SUNCOO Cut-50 Plasma Cutter Electric DC Inverter Machine Review

SUNCOO Cut-50 Plasma Cutter Electric DC Inverter Cutting Machine with Digital Display Dual Voltage 110/220V, 1/2" Clean CutWhenever you are going for buying a plasma cutter must keep one thing in your mind that the tool must be technically and performance wise high. Plasma cutters are different in size, work and are having different specifications according to the instructions and usage.

Maybe it is a bit tricky for you to select a perfect unit and one thing more that everybody want a perfect item in affordable price. So, you should not worry, here you get a complete best plasma cutter review, obviously which can help you to find a best plasma cutter.

As you want a perfect plasma cutter in every respect with affordable price, then here is a complete description of SUNCOO Cut-50 Plasma Cutter. SUNCOO Cut-50 Plasma Cutter is an electric inventor yellow in color. It has the ability to cut iron, stainless steel, copper and other metals.

You can use this machine for professional cutwork. It is very lightweight machine with a compact design. It works in different fields like maintenance services, repairing metal materials, site work and ducting work etc.

You can use it easily because it has a comprehensive manual, which can help you that how can you monitor the installation process. Its voltage range is between 110V and 220V like some other plasma cutter. It uses the electron circuit for giving an endless output of current.

It cuts smoothly and uses the PWM technology. The most important thing about this plasma cutter that it has digital LED display. It provides 1.8 times more cutting speed than others.

You can use it in different areas of professional field but it is best for following applications:

  • Automotive
  • Sheet metal fabrication
  • Light industrial usage
Pros
  • It has the ability to cut various products of metal no matter how much thick the metal is.
  • It is useful for both home and industrial use.
  • You find this machine light in weight and yellow color with a cheap price.
  • This compact design machine has protection pilot for safety of the user.
  • It does not release a large amount of toxic gases
Cons
  • Like all other units, this machine has also has some flaws, mentioned below:
  • It needs cleaning and maintenance at regular basis.
  • You can feel little harder when you will be cutting from the edge of the material.

 

7. VIVOHOME DC Inverter Plasma Cutter – Cheap Affordable 

VIVOHOME DC Inverter Plasma Cutter Cutting Machine Dual Voltage 110V/220V CUT-50Like other plasma cutters, VIVOHOME DC Inverter Plasma Cutter has the great ability to cut metal in clean and smooth cut. You will buy this best plasma cutter under $500 with great efficiency of work.

This plasma cutter is designed or constructed with most advanced inverter technology. It has fast cutting speed and with high cutting ability. It can cut metal material up to 12mm thickness.

One of the best features of this plasma cutter machine is that it steps up the 50 Hz frequency to over 100 KHz. So, it is useful for wide applications. You can say that it can be used in almost all metal cutting and modifying fields.

Along with these features, it has rectification current, inverter power supply generator, powerful DC welding current which is generated with inverter power supply and step down voltage.

Some additional and interesting features:

When inverter technical switch power is in used then the weight of the main transformer will be reduced and efficiency of work is increased by 30%. According to the principle of high frequency, piloting arc system can strike arc easily. It has another ability that it can supply and turn off gas.

If you want this plasma cutter in a deal then it will be very beneficiary for you because you can get a lot of additional useful gadgets along with it like:

  • You can get a 1 cutting torch LG-40
  • One piece of earth clamp
  • A fine AIR Regulator
  • Welding Face Mask for your safety
  • Pressure reducing valve
  • Goggles are also for your safety
  • Two pieces of Plasma Tip
  • A PG Head
  • Two pieces of gas pipe clasper
  • Two hoops
  • English Manual
  • Chipping Hammer
  • Wire Brush

All these items are perfectly useful for you while working with any plasma cutter, so try to avail deals for the plasma cutters.

Pros
  • It has dual voltage operation as some other plasma cutter.
  • You will find different safety materials with it for your safety.
  • It can slice material of any kind of metal thickness between 1 to 12mm.
  • You can set the frequency at your required and desired range with the help of MOSFET technology.
  • You will find it very fast when you are working on any project.
Cons
  • One thing you will find it that it never comes with a user manual.
  • Its regulator doesn’t have any hose.

 

8. Hobart 500564 Airforce Plasma Cutter – Best For Money

Hobart 500564 Airforce 12ci Plasma Cutter with Built-In Air Compressor 120VWhenever you want to buy a best plasma cutter just consider a few things like, Versatility in cutting, safety system, durability and the construction of the design. All these things make a cutter perfect or not a useful machine. Here we are going to tell you about a best plasma cutter with all useful specifications.

Yes, we are talking about one and only Hobart 500564 Airforce 12ci Plasma Cutter, the best plasma cutter under $1000. Without any delay let us check its specifications which make its position stronger than others.

Cutting ability:

It can almost cut all metal materials with different thickness, like brass, copper, stainless steel, aluminum, stainless steel, alloy steel and etc. It does its work efficiently, smartly and cuts a mild steel of ¼’’.

Performance:

It is light weight gadget but having an extra ordinary and powerful cutting performance. It cuts smoothly and smartly, any type of metal.

Safety:

It has a great post-flow air cooling system, the troch and tip of the machine cools quickly. It is built with troubleshooting indicators which alerts if any unusual situation comes on the way. Hobart 12ci has a LED light as an indicator. It has a dust removal fan which works and reduce the dust particles.

It has another interesting feature, the machine will automatically shut down in the rugged work environment. It also works fine when the machine is over heated. It has a powerful air compressor and pilot arc as well. The XT12R torch is easy to grip and can be held comfortably.

One of the best qualities of any machine will be that it must be easy to use. Hobart 12ci is a user friendly product. The most amazing thing about this machines is that it runs on household current. You can use it for home, for business purposes and also for repairing.

Simply, you will find it a best plasma cutter in the plasma cutter series.

Pros
  • It is a light weight machine and easy to move project to project.
  • It has a working cable.
  • No need to buy any external air compressor.
  • It has a pilot arc which helps the cutter an easier start.
Cons
  • It Operates only on 120V.
  • It cannot cut thicker metals.

 

9. HITBOX Plasma Cutter 40A 220V Electric DC Inverter Air Plasma Cutting Machine 

Plasma Cutter 40A 220V Electric DC Inverter Air Plasma Cutting Machine CUT40 Metal Cutter HITBOXSometimes you feel confused whenever you are choosing one of the best items and not able to decide what kind of a thing will actually fulfil all your requirements. But if you are going to choose the best plasma cutter which can cut the thicker layer of any metal with neat and smooth cut then you must not worry, here is something for you in the series of plasma cutters.

Yeah! We are talking about plasma cutter 40a inverter air plasma cutting machine. This plasma cutter gives an outstanding performance irrespective of the air pressure. It is able to work effectively and cut copper, stainless steel and aluminum. It has the great ability to cut thickest form of carbon up to 12mm. While working with this unit you will see that it provides safety to the user with its various features.

Here are some features of this best plasma cutter in price:

  • It has a digital display with plasma cutting torch.
  • It can cut smoothly and cleanly.
  • It is famous for its flat cut.
  • It has an accurate cutting ability.
  • It gives a stable output and its deformation is very small.
  • When external gas pressure is high it does apply its regulator gas pressure.
  • This machine has reliable grounding body.

You will get other useful items in the deal with Plasma Cutter 40A 220V Electric DC Inverter Air Plasma Cutting Machine.

So, in the package you will get:

  • One Plasma Cutter with ability to cut a metal at 12mm thickness.
  • A handle for using accurately.
  • One L-wrench, as a useful tool.
Pros
  • It is very light in weight
  • This machine is very compact.
  • You will find this machine in cheap price.
  • It has the ability to slice a metal as thick as 12mm.
  • It has a clear digital display.
  • The most notable thing of this machine is that it provides you with a complete and impressive customer care service.
Cons

It is a universal truth that you cannot find perfection in every respect, in any human made product. In every production there are some flaws, same like that, this plasma cutter also has some faults.

  • This machine does not have any external compressor.
  • It needs to be cleaned up twice in a month with compressed air.
  • You can face some error because of its manual measurement.
  • Try to use safely and avoid any damage because you will not be able to repair it on your own.

 

10. Biltek 50Amp Air Plasma Cutter-Portable & Easy Quick Setup Metal Cutter

Biltek 50Amp Air Plasma Cutter, 1/2 Inch Cut 110V/220V Input CUT50D DC Inverter Dual Voltage with Pre-Installed 110V US Plug, Portable & Easy Quick Setup Metal CutterIn the plasma cutter series, you may find many best cutters but after getting Biltek 50AMP Plasma Cutter, you will never regret your decision. This is one of the best plasma cutters, which perform its work quite accurately and perfectly.

This item is perfect for alloy steel, mild steel, stainless steel, copper, aluminum, metal sheet and many other metal materials.

Characteristics:

This plasma cutter is designed by Advanced Inverter Technology and is have high cutting performance. It can cut up to 1/2″ thick steel with the high performance cutting non-pilot arc torch. This plasma cutter 50AMP CUT50D DC Inverter Dual Voltage 110V/220V.

Let us discuss some specification of this best plasma cutter:

This blue color plasma cutter belongs the brand “Biltek”, one of the best technical brand. Without any doubt it will be your best choice ever due to its extra ordinary accurate performance and design. This plasma cutter can cut 12mm thick steel and its maximum cut is 10mm thick stainless steel, mild steel and aluminum etc. If we talk about its optimal cut then you may cut the 8mm thick steel easily.

You will find a dual voltage at a time 110V-220V, 50/60Hz with 1-PH. Its input current is 20-40A and output current is 15-50A. If you are thinking about what will its required air flow? Its required Air flow rate is 0.6-0.75Mpa.

If you are thinking about that what is a complete deal, then don’t worry, here is the detail of items, which are included in the package:

In this deal you will get one plasma cutter CUT50D Power Supply with one cutting torch with Plasma Cutter 50AMP CUT50D DC Inverter with the ability of Dual Voltage 110V/220V.

You will find an air regulator having the ability of air filtration. 2 nozzle tips, 2 electrodes, 1 ceramic cup, 1 ceramic ring and 1 ground clamp is also available in this deal.

You will find a manual which guides you how to operate this cutter. The most important item is also provided in this deal, which is the cutting torch with Non-Pilot Arc torch which can enhance the performance of cut.

Pros
  • It can cut 12mm thick metal easily with accuracy.
  • You will find a standard US 110VPlug.
Cons
  • You must have air supply from an air compressor by your own, not provided with the deal.
  • Another thing, you will have to connect a 220V plug to reach the 50A cut specs.

 

11. Amico CUT-50, 50 Amp Pro. Plasma Cutter – Best For Money 

CUT-50, 50 Amp Pro. Plasma Cutter, DC Inverter 110/230V Dual Voltage Cutting Machine NewNow your search for a perfect plasma cutter with high speed may get completed because here is something new for you in plasma cutter series, which may fulfil all your requirements. Amp Pro. Plasma Cutter a new and an exciting invention with high performance cutting torch.

This plasma cutter is having a wonderful design with the meter. This one comes with new looks and design, like its filter is located inside the body and adjustment attached to the front of the machine. It is an advanced and unique model which is easier to use than other cutters.

50 Amp Pro. Plasma Cutter is designed with the advanced inverter technology with new digitally controlled system and high cutting performance. It is a portable machine and you can carry it project to project. Commonly it is perfect for small business and home simple repairing.

Features:

Its auto-voltage ability can adapt to 100-240V input power with plug adapters. As other plasma cutters, it also can cut the stainless steel, alloy steel, mild steel, copper, aluminum and other metal materials. It can cut clean and neat.

You will never waste your energy for cleaning and maintenance of this machine. It releases less noxious gases and fire hazard than other cutters. Its torch has an advanced design which provide you with comfortable grip.

Its input current range is Ac-115V/ 35.7A & AC-230V / 27.1A and cutter current range is AC-115V at 15-35A & AC-230V at 15-50A.  You will never regret after spending money for this machine because it will provide you accurate and clean cut with 85% efficiency.

In the package you will get all essential accessories like:

  • CUT-50 professional plasma cutter machine with 13 Feet (SG55/AG60) plasma cutter gun, 11 Feet 600A work clamp with cable and most powerful 110V/230V adapter.
  • You will get the manual which guides you completely that how to operate it.
Pros
  • No doubt in the performance and it is a perfect advance designed machine.
  • Automatic dual voltage 110V/240V
  • Best for small projects and portable machine.
Cons
  • This plasma cutter doesn’t have a pilot arc for high voltage low current arc.
  • Not useful for larger projects.

 

12. Mophorn 50Amp Plasma Cutter – (Digital Plasma Welding Machine)

Mophorn 50Amp Plasma Cutter Dual Voltage 110V/220V Portable Plasma Welder Plasma Cutting Machine CUT50F Inverter Digital Plasma Welding Machine(50 AMP 110V/220V)What is the best plasma cutter machine? A best plasma cutter machine must have the ability to cut the metal clean and perfect with high speed. It must cut stainless steel, copper, mild steel, alloy steel, aluminum and other all metal materials with electric conduct.

So, when you want to buy a best plasma cutter then you are obviously clear that what should be your required product. But if you confused a bit then you should not worry anymore as we are here to solve all your hesitations and will show you a clear way to get a perfect plasma cutter.

Here we are going to tell you one of the best plasma cutters, “Mophorn 50Amp Plasma Cutter” designed by most advanced inverter technology and it is a complete energy saver. It has the ability to support dual voltage input, 110V and 220V accurately. It can cut the metal with its perfect plasma torch like stainless steel, aluminum, mild steel, carbon steel, alloy steel etc.

It does not matter if you are professional or a DIY user, it always provides you with a perfect and professional cutting. It is very easy to use and easy to control as well, you can say a beginner can also use it. It has a LED display also. Its cutting capacity is 1/2’’ thick metal with a high speed and smooth, clean and beautiful cut. It has high efficiency, which means that it has an ability of providing you with smoother cuts than the other plasma cutters.

The most amazing thing that makes it reliable, is the IP21 level protection from overheating and over pressure. It has cooling heat dissipation system as well.

You can use it at home, for business purposes and as hobby because it is compact and easy to move from one place to another.

Pros
  • It is a CE certified machine.
  • It can cut maximum 12mm thick metal.
  • You can also use it even if you are a beginner user.
  • It has a manual with it.
  • Advanced inverter technology is used in its manufacturing.
Cons
  • Air may leak
  • You will have to buy an additional plug

 

Well, it is all about Mophorn 50Amp Plasma Cutter Dual Voltage 110V/220V Portable Plasma Welder Plasma Cutting Machine CUT50F Inverter Digital Plasma Welding Machine (50 AMP 110V/220V), a best plasma cutter.

13. 2018 AHP AlphaTIG 200X 200 Amp IGBT AC DC Tig/Stick Welder

2018 AHP AlphaTIG 200X 200 Amp IGBT AC DC Tig-Stick Welder with PULSE 110v 220v 3 YEARS WARRANTYAHP AlphaTIG 200X200 Amp IGBT Welder is highly recommended due to its perfect performance and clean welding. This is made up by advanced inverter technology and it is a compact machine. This machine was introduced first time on 2014 then APH modified and upgraded time to time but in 2018 it got a major upgrade. It is modified in pulse frequency from ±5 Hz to 200 Hz. New thing added in this machine is pedal and improved quality torch. 2018 model is the high quality welding machine.

If we describe it by its performance then the first thing is that, it can work in 1/8’’ maximum 3mm thick metal at 40-80 amp power. At 200 amp power it can work on 3/8’’ (maximum 10mm) thick metal, which is an extra ordinary performance of any welding machine ever. This machine is constructed for all the metals like stainless steel, alloy steel, aluminum, copper, mild steel and etc.

It can weld efficiently and perfectly any thinner metal like it can weld ¼’’ aluminum and ¾’’ steel smartly. It can join a wide variety of metals like brass, bronze, nickel, titanium, magnesium, copper, stainless steel and other alloys.

You can use it for different positions of metal like horizontal or vertical and it is able to weld automobiles and furniture. It can also weld 6013 and 7018 powerfully. It is very costly but if you are looking for a robust, resilient and comfortable product, this will be a best choice for you.

It is suitable for home repairing because this machine does not leave smoke, spark and any dangerous gas and it is also suitable industrial welding and you can weld things as hobby. If you are an expert welder then it will work professionally.

Pros
  • It is a portable machine and easy to move from place to place.
  • It has a pedal controller.
  • It has an option for stick welding which allows a wide range of welding.
Cons
  • It does not work at high speed
  • For beginner, it is not easy to use, just professionals can use it.

 

End Note:

Well here we have shared a few but best plasma cutters reviews for you. By this discussion you can find the best plasma cutter for metal art. Now, it just dependent upon your requirements that what kind of cutter you want.

You will also have to look for the consumable replacement cost so that you can get an idea of the future costs. The inexpensive cutting machines can cost you more in the future so you should not be getting the inexpensive one in order to save the cost.

You will not be able to save the money for long term, you just get the best machine for yourself. There are many good deals available above and you should be getting one of them after getting to know about your requirements.

There is no need of going for the cheaper ones as they are going to cost you more than the actual machine so you should be taking care of this fact.

If you have any more suggestions and information, please share with us in the comments section below. We will feel happy to add your suggestion in this list if that one will be worth adding. Keep sharing good information and you can also share your reviews so that we would know more about these cutters.